SIPLACE D2 Fast and Flexible

SIPLACE D2 Fast and Flexible

The SIPLACE D2 placement machine combines a high placement rate with accuracy and flexibility. It uses the
Collect & Place placement method.
The SIPLACE D2 placement machine is equipped with two gantries which can be positioned quickly and accurately
in the X and Y directions.At each gantry there is a 6 or 12-nozzle Collect & Place head.
The head modularity principle allows the placement heads to be reconfigured to suit changing requirements.

The table “Technical Data” on page 7 contains a list of the possible placement head configurations and the

resulting placement rate.
Category:

Description

Types of placement head
12-nozzle Collect & Place head (C&P12)
6-nozzle Collect & Place head (C&P6)
Number of gantries
2 (see Fig. page 9)
Placement head configuration and placement
ratea
(Benchmark test)
Placement rate
C&P12 / C&P12 31,000 comp./h
C&P12 / C&P6 21,000 comp./h
C&P6 / C&P6 19,500 comp./h
Placement positions
 

6,000 / gantry
Range of components
0.4 x 0.2 mm² (01005)b
0.6 x 0.3 mm² (0201) to 18.7 x 18.7 mm²
(01005 option with software version 604, April 2007)
Component height
C&P12: 6 mm
C&P6: 8.5 mm
Placement accuracy /
angular accuracy
C&P12: ± 67.5 μm, ± 0.53° / (3σ), ± 90 μm, ± 0.71° / (4σ)
(standard camera)
C&P12: ± 60 μm, ± 0.53° / (3σ), ± 80 μm, ± 0.71° / (4σ)
(high-resolution camera)
C&P6: ± 52.5 μm, ± 0.225° / (3σ), ± 70 μm, ± 0.3° / (4σ)
Component feeding
2 CO changeover tables with tape reel holders and integral
waste containers,
15 locations, each 30 mm wide, for each CO changeover table
Feeder module types
Tapes, bulk cases, stick magazines, application-specific OEM
feeder modules, surftape feeder modules (8, 12, 16 mm)
PCB thickness
0.3 – 4.5 mm (thicker PCBs on request)
Feeding capacity
30 tape feeder modules 3 x 8 mm S (90 tracks)
30 tape feeder modules 2 x 8 mm S (60 tracks)
30 tape feeder modules 12/16 mm S (30 tracks)
20 tape feeder modules 24/32 mm S (20 tracks)
14 tape feeder modules 44 mm S (14 tracks)
12 tape feeder modules 56 mm S (12 tracks)
PCB format
(LxW)
PLEASE NOTE:
With PCB widths > 450 mm make
sure that the peripheral modules
are also able to process these widths
50 x 50 mm² to 460 x 460 mm²
50 x 80 mm² to 610 x 460 mm² (Long board option)
(Width up to 508 mm for Wide board configuration)
Flexible dual conveyor
50 x 50 mm² to 460 x 216 mm²
50 x 80 mm² to 610 x 216 mm² (Long board option)
(Width up to 242 mm for Wide board configuration)
Flexible dual conveyor in Single conveyor mode
50 x 50 mm² to 460 x 380 mm²
50 x 80 mm² to 610 x 380 mm² (Long board option)
(Width up to 430 mm for Wide board configuration)

Reviews

There are no reviews yet.

Be the first to review “SIPLACE D2 Fast and Flexible”

Your email address will not be published. Required fields are marked *

Related products